Aluminum Rod Bare Conductor Cable

ASTM 50mm 100mm2 Overhead AAC ACSR Single Core Bare All Aluminum Conductor Wire Cable AAAC

Producing and providing the products according to Chinese standard GB/T3954-2001,and consulting and following the American standard ASTM B233:1997 and German DIN standard EN 17152:1997.

The Component of Material

Note: When the mechanics function and electric function of products are qualifedthe component of chemistry elementmay not be the total checking date.

ACSR Conductor

ACSR Conductor Steel core aluminum stranded wire has simple structure, easy installation, easy maintenance, low line cost, large

transmission capacity, and is conducive to the laying of special geographical conditions such as crossing rivers and valleys. It

is widely used in overhead transmission and distribution lines of various voltage levels.

AAAC Aluminum Conductor

AAAC aluminum alloy conductor is 1% higher than the steel core aluminum stranded wire of the same cross-section, without power loss. It is widely used in overhead power distribution and transmission lines, close to the ocean coastline.

The AAAC-400 wire has a pull-to-weight ratio of 11.67km, which can generally be used on a large-span line of about 1000m.

AAAC Aluminum Conductor

AAAC aluminum alloy conductor is 1% higher than the steel core aluminum stranded wire of the same cross-section, without power loss. It is widely used in overhead power distribution and transmission lines, close to the ocean coastline.

The AAAC-400 wire has a pull-to-weight ratio of 11.67km, which can generally be used on a large-span line of about 1000m.

DAYA  Aluminum Rod Bare Conductor Cable  Details

DAYA  Aluminum Rod Bare Conductor Cable    Working conditions

Packing:

--100m/Coil with Shrinking Film Wrap,  6 Coils per outer carton.

--100m/Spool, spool can be Paper, Plastic, or ABS, then 3-4 spools per carton,

--200m or 250m per Drum, two drums per carton,

--305m/Wooden Drum, one drum per outer carton or pallet loading,

--500m/Wooden Drum, one drum per outer carton or pallet loading,

--1000m or 3000m wooden drum, then pallet loading.

*We can also offer customized OEM packing according to clients' request.

Delivery:

Port: Tianjin, or other ports as per your requirements.

Sea freight: FOB/C&F/CIF quotation are all available.

*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.

DAYA Aluminum Rod Bare Conductor Cable   Parameter (Specification)

DIAMETER TOLERANCE OF 9.5 MM ALUMINUM WIRE ROD

CHEMICAL COMPOSITION in % OF 9.5 MM ALUMINUM WIRE ROD

TENSILE STRENGTH LIMITS OF 9.5 MM ALUMINUM WIRE ROD

DAYA Aluminum Rod Bare Conductor Cable   Service

Pre-sales

We provide technical support and complete power distribution solutions tailored to your needs. If the design drawings you provide are deemed unfeasible, we will optimize the plan and adjust it with the dimensions of the cabinet, the location of the equipment, and so on. We will also optimize the configuration of the products to make them meet your requirements.

After-Sales

If any problem occurs, we will first provide support by phone or email. We will perform a remote debug if necessary. Furthermore, our products come with a troubleshooting manual for reference when trying to find the fault and solve issues by yourself. Most problems can be solved by the above-mentioned methods. We will check in every year or so to acquire detailed information about your equipment to get a better understanding of the inner workings.

Our customer service promise

1. We will quickly solve the problem after receiving the issue report or repair request.

2. We then explain the cause of failure in detail and any fees will be charged according to market pricing.

3. If we take any parts back for inspecting, we will apply fragile notice stickers on them or write their serial number down to maintain the safety of the parts.

4. If your complaint is deemed valid, we will refund repair fees to you on-site.

DAYA Aluminum Rod Bare Conductor Cable  FAQ

1.Q: Are you a manufacturer or trader?

A:We are all, Main business of the company low-voltage switchgear, power distribution cabinet, explosion-proof cabinet design, production and system programming. 

2.Q: Whether to support OEM/ODM?Can you design the equipment according to our size?

A: Of course, we can customize any product according to customer requirements, and we can provide design solutions and solutions.

3.Q: Why should I buy from you instead of someone else?

A: First of all, we can provide all customers with very professional support consisting of IT consultants and service teams.Secondly, our main engineers have more than 20 years of experience in power distribution equipment development.

4.Q:What about the delivery time?

A:Generally, our delivery time is around 7-15 days about. While, it depends on the requirement of customers and the

quantity of products.

5.Q:What about the shipment?

A:We can arrange shipment by DHL, FedEx, UPS,etc.of course, customers can also use their own freight forwarders.

6.Q:How about the terms of payment?

A:Supported T/T、Paypal、Apple Pay、Google Pay、Western Union,etc. Of course we can discuss on this.