AOGULI AAC conductors are manufactured in accordance with the following standards:
*ASTM B230, NTC 360: Aluminum 1350-H19 Wire.
*ASTM B231, NTC 308: Concentric-Lay-Stranded Aluminum 1350 Conductors.
*IEC 228 for sizes in mm2.
AAC is used mainly in urban areas where the spacing is short and the supports are close. Class AA for bare conductors used in overhead lines. Class A conductors to be covered with weather-resistant materials and for bare conductors where greater flexibility are required.
* ASTM B-232 * BS EN-50182
* CSAC 61089 * AS/NZS 3607
* DIN 48204 * IEC 61089
* GB/T 1179 * ASTM B711
ACSR conductors have been widely used in power transmission lines with various voltage levels, because they have such good
characteristics as simple structure, convenient insulation and maintenance, low cost large transmission capacity. And they are
also suitable for laying across rivers valleys and the places where special geographical features exist.
--100m/Coil with Shrinking Film Wrap, 6 Coils per outer carton.
--100m/Spool, spool can be Paper, Plastic, or ABS, then 3-4 spools per carton,
--200m or 250m per Drum, two drums per carton,
--305m/Wooden Drum, one drum per outer carton or pallet loading,
--500m/Wooden Drum, one drum per outer carton or pallet loading,
--1000m or 3000m wooden drum, then pallet loading.
*We can also offer customized OEM packing according to clients' request.
Port: Tianjin, or other ports as per your requirements.
Sea freight: FOB/C&F/CIF quotation are all available.
*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.
Denominação
|
Seção Transversal
kcmil mm²
|
Formação Nº
de Fiosx
Diâmetro N°
xmm
|
Diâmetro
Nominaldo
Condutor
mm
|
Massa
Nominal
kg/km
|
Cargade
Ruptura
kN
|
Resistência
Elétrica
Máxima(CC) a
20°C
ohm/km
|
Resistência
Elétrica
Máxima (CA/
60Hz) a50°C
ohm/km
|
Capacidadede
Corrente (*)
A
|
|
CHLORINE |
67,8 |
34,36 |
7 x2,50 |
7,50 |
94 |
8,18 |
0,8637 |
0,9649 |
163 |
CHROMIUM |
82,0 |
41,58 |
7 x2,75 |
8,25 |
113 |
9,91 |
0,7138 |
0,7975 |
184 |
FLUORINE |
97,7 |
49,48 |
7 x3,00 |
9,00 |
135 |
11,8 |
0,5998 |
0,6702 |
206 |
HELIUM |
152,6 |
77,30 |
7 x3,75 |
11,25 |
211 |
17,6 |
0,3839 |
0,4291 |
274 |
HYDROGEN |
219,7 |
111,30 |
7 x4,50 |
13,50 |
304 |
24,3 |
0,2666 |
0,2982 |
347 |
IODINE |
244,8 |
124,00 |
7 x4,75 |
14,25 |
339 |
27,1 |
0,2393 |
0,2677 |
372 |
- |
300,0 |
151,85 |
19 x3,19 |
15,95 |
417 |
36,06 |
0,1964 |
0,2199 |
424 |
KRYPTON |
311,1 |
157,60 |
19 x3,25 |
16,25 |
433 |
37,4 |
0,1892 |
0,2119 |
435 |
- |
350,0 |
177,61 |
19 x3,45 |
17,25 |
488 |
42,18 |
0,1679 |
0,1882 |
470 |
LUTETIUM |
360,8 |
182,80 |
19 x3,50 |
17,50 |
502 |
41,7 |
0,1631 |
0,1828 |
478 |
- |
400,0 |
203,19 |
19 x3,69 |
18,45 |
558 |
46,32 |
0,1468 |
0,1647 |
512 |
NEON |
414,1 |
209,80 |
19 x3,75 |
18,80 |
577 |
47,8 |
0,1421 |
0,1595 |
523 |
- |
450,0 |
228,14 |
19 x3,91 |
19,55 |
627 |
52,01 |
0,1307 |
0,1468 |
552 |
- |
500,0 |
253,30 |
19 x4,12 |
20,60 |
696 |
57,75 |
0,1177 |
0,1324 |
591 |
NITROGEN |
516,2 |
261,54 |
37 x3,00 |
21,00 |
720 |
62,2 |
0,1143 |
0,1286 |
603 |
- |
550,0 |
278,50 |
19 x4,32 |
21,60 |
765, |
63,5 |
0,1071 |
0,1206 |
628 |
NOBELIUM |
605,8 |
307,00 |
37 x3,25 |
22,80 |
845 |
72,8 |
0,0973 |
0,1098 |
669 |
- |
650,0 |
329,60 |
19 x4,70 |
23,50 |
906 |
72,02 |
0,0905 |
0,1023 |
699 |
- |
651,0 |
330,00 |
37 x3,37 |
23,59 |
909 |
78,4 |
0,0906 |
0,1024 |
700 |
- |
663,0 |
336,00 |
37 x3,40 |
23,80 |
925 |
79,78 |
0,089 |
0,1006 |
708 |
OXYGEN |
664,5 |
336,70 |
19 x4,75 |
23,80 |
925 |
73,6 |
0,0886 |
0,1002 |
709 |
- |
671,0 |
340,00 |
37 x3,42 |
23,94 |
936 |
80,72 |
0,0879 |
0,0994 |
713 |
- |
679,0 |
344,00 |
37 x3,44 |
24,08 |
947 |
81,67 |
0,0869 |
0,0983 |
719 |
- |
700,0 |
354,53 |
61x2,72 |
24,48 |
978 |
79,75 |
0,0845 |
0,0956 |
732 |
- |
723,0 |
366,30 |
37 x3,55 |
24,85 |
1009 |
83,5 |
0,0816 |
0,0924 |
748 |
- |
751,5 |
380,80 |
37 x3,62 |
25,34 |
1049 |
86,8 |
0,0785 |
0,0890 |
767 |
PHOSPHORUS |
806,5 |
408,65 |
37 x3,75 |
26,30 |
1125 |
93,1 |
0,0731 |
0,0831 |
803 |
- |
823,0 |
417,40 |
37 x3,79 |
26,53 |
1150 |
95,17 |
0,0716 |
0,0815 |
814 |
- |
823,0 |
416,93 |
61x2,95 |
26,55 |
1151 |
93,81 |
0,0718 |
0,0817 |
813 |
- |
826,0 |
418,30 |
37x3,794 |
26,56 |
1152 |
95,37 |
0,0715 |
0,0813 |
814 |
- |
850,0 |
430,74 |
37 x3,85 |
26,95 |
1186 |
98,2 |
0,0694 |
0,0790 |
830 |
- |
900,0 |
455,70 |
37 x3,96 |
27,72 |
1255 |
103,9 |
0,0656 |
0,0749 |
860 |
- |
944,0 |
478,40 |
61x3,16 |
28,44 |
1320 |
107,64 |
0,0626 |
0,0716 |
887 |
We provide technical support and complete power distribution solutions tailored to your needs. If the design drawings you provide are deemed unfeasible, we will optimize the plan and adjust it with the dimensions of the cabinet, the location of the equipment, and so on. We will also optimize the configuration of the products to make them meet your requirements.
If any problem occurs, we will first provide support by phone or email. We will perform a remote debug if necessary. Furthermore, our products come with a troubleshooting manual for reference when trying to find the fault and solve issues by yourself. Most problems can be solved by the above-mentioned methods. We will check in every year or so to acquire detailed information about your equipment to get a better understanding of the inner workings.
1. We will quickly solve the problem after receiving the issue report or repair request.
2. We then explain the cause of failure in detail and any fees will be charged according to market pricing.
3. If we take any parts back for inspecting, we will apply fragile notice stickers on them or write their serial number down to maintain the safety of the parts.
4. If your complaint is deemed valid, we will refund repair fees to you on-site.
1.Q: Are you a manufacturer or trader?
A:We are all, Main business of the company low-voltage switchgear, power distribution cabinet, explosion-proof cabinet design, production and system programming.
2.Q: Whether to support OEM/ODM?Can you design the equipment according to our size?
A: Of course, we can customize any product according to customer requirements, and we can provide design solutions and solutions.
3.Q: Why should I buy from you instead of someone else?
A: First of all, we can provide all customers with very professional support consisting of IT consultants and service teams.Secondly, our main engineers have more than 20 years of experience in power distribution equipment development.
4.Q:What about the delivery time?
A:Generally, our delivery time is around 7-15 days about. While, it depends on the requirement of customers and the
quantity of products.
5.Q:What about the shipment?
A:We can arrange shipment by DHL, FedEx, UPS,etc.of course, customers can also use their own freight forwarders.
6.Q:How about the terms of payment?
A:Supported T/T、Paypal、Apple Pay、Google Pay、Western Union,etc. Of course we can discuss on this.