XHHW-2 Electric Wire

The key difference is the additional protections provided by the insulation of XHHW-2, which is a thermoset while THHN is a thermoplastic. The jacket of XHHW-2 wire is thicker and more rugged than THHN’s, provides more protection against chemicals, abrasion, moisture, and is more flexible as well. These additional benefits account for its higher price than THHN.

For example, XHHW-2 wire is hospital grade and has significantly higher insulation resistance than THHN. Though its jacket is actually thicker than THHN’s, XHHW-2’s thermoset material gives it greater flexibility. Furthermore, given its greater flexibility, it is often used in projects where there are lots of corners and bends. XHHW-2 is also rated for wet locations whereas standard THHN is not.

XHHW-2 wire’s benefits (which stem from its thermoset qualities) also account for why it is more expensive than THHN. The latter’s thermoplastic base is less expensive. However, along with its water-resistant insulation, XHHW-2 has a 90° C temperature rating in dry and wet locations. Kris-Tech goes beyond the standard requirements, offering a 105° C dry and 1000 volt rating.

Here are some common uses found for XHHW-2:

Often used as building wire XHHW-2 can be used in power circuits run in conduit from the utility meter to main circuit protection panels. It can also be used in conduit from circuit protection panels to uses throughout a building. Some other uses are machine tool wiring, appliance and control circuits.

Though it is pricier than THHN, XHHW-2’s additional benefits make it a popular choice for electrical contractors and electricians looking for a hardy wire product suited for industrial, residential, and commercial construction.

DAYA XHHW-2 Electric Wire Details

DAYA XHHW-2 Electric Wire Working conditions

Specifications:

XHHW-2 Electric Wire are primarily used in conduit or recognized raceways for service and feeder wiring as specified in the National Electrical Code. XHHW-2 conductors may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating for XHHW-2 conductors is 1000 volts. Suitable for use in Health Care Facilities per section 517.160 of the NEC where a dielectric constant of 3.5 or less may be specified. This product is designed to be installed without the application of pulling lubricant.

Packing:

--100m/Coil with Shrinking Film Wrap, 6 Coils per outer carton.

--100m/Spool, spool can be Paper, Plastic, or ABS, then 3-4 spools per carton,

--200m or 250m per Drum, two drums per carton,

--305m/Wooden Drum, one drum per outer carton or pallet loading,

--500m/Wooden Drum, one drum per outer carton or pallet loading,

--1000m or 3000m wooden drum, then pallet loading.

*We can also offer customized OEM packing according to clients' request.

Delivery:

Port: Tianjin, or other ports as per your requirements.

Sea freight: FOB/C&F/CIF quotation are all available.

*For some countries such as Africa countries, middle east countries, our sea freight quotation is much cheaper than clients get from local shipping agency.

DAYA XHHW-2 Electric Wire Parameter (Specification)

DAYA XHHW-2 Electric Wire Service

Pre-sales

We provide technical support and complete power distribution solutions tailored to your needs. If the design drawings you provide are deemed unfeasible, we will optimize the plan and adjust it with the dimensions of the cabinet, the location of the equipment, and so on. We will also optimize the configuration of the products to make them meet your requirements.

After-Sales

If any problem occurs, we will first provide support by phone or email. We will perform a remote debug if necessary. Furthermore, our products come with a troubleshooting manual for reference when trying to find the fault and solve issues by yourself. Most problems can be solved by the above-mentioned methods. We will check in every year or so to acquire detailed information about your equipment to get a better understanding of the inner workings.

Our customer service promise

1. We will quickly solve the problem after receiving the issue report or repair request.

2. We then explain the cause of failure in detail and any fees will be charged according to market pricing.

3. If we take any parts back for inspecting, we will apply fragile notice stickers on them or write their serial number down to maintain the safety of the parts.

4. If your complaint is deemed valid, we will refund repair fees to you on-site.

DAYA XHHW-2 Electric Wire FAQ

1.Q: Are you a manufacturer or trader?

A:We are all, Main business of the company low-voltage switchgear, power distribution cabinet, explosion-proof cabinet design, production and system programming.

2.Q: Whether to support OEM/ODM?Can you design the equipment according to our size?

A: Of course, we can customize any product according to customer requirements, and we can provide design solutions and solutions.

3.Q: Why should I buy from you instead of someone else?

A: First of all, we can provide all customers with very professional support consisting of IT consultants and service teams.Secondly, our main engineers have more than 20 years of experience in power distribution equipment development.

4.Q:What about the delivery time?

A:Generally, our delivery time is around 7-15 days about. While, it depends on the requirement of customers and the

quantity of products.

5.Q:What about the shipment?

A:We can arrange shipment by DHL, FedEx, UPS,etc.of course, customers can also use their own freight forwarders.

6.Q:How about the terms of payment?

A:Supported T/T、Paypal、Apple Pay、Google Pay、Western Union,etc. Of course we can discuss on this.